Polyurethane (PU) Clean Coat Chemical Resistant Coating, Pack Size: 20 L

Description Chemi Tech CR 103 is a high performance epoxy - phenolic coating designed for use where corrosion and chemical resistance is required. After curing it produces a highly cross linked polymer network. This unique system prevents permeation and subsequent attack of the coating by highly aggressive chemicals, allowing the system to be used whenever superior Chemical and Corrosion resistance is required. It shows excellent performance even on manually prepared surfaces. Chemi Tech CR 103 confirms to US military specification MIL-PRF-4556F and DEF STAN 80-97 Advantages -Excellent chemical resistance (Acids, alkalis, solvents). -Good adhesion to concrete and steel surface -Excellent performance even on manually prepared surfaces - Easy to apply Colour As per shade card FINISH Semi Gloss Dry Film 75 -100 microns Thickness Volume 70 % Solids of Solids Theoretical 7.0 sq m/ lit at 100 microns DFT Coverage Dry Temp. Continuous 93°C Resistance Non Continuous 120°C Selection & Specification Data Physical Properties Shelf Life Mixing Ratio (A:B) 3 : 1 ( by volume) Appearance (after mix) Free flow thixo liquid Mixed Density - about 1.30 kg./lit. Pot Life ( minimum ) - 3 hrs at 25ºc Curing Time - Full cure - 7 days Recoat ability - After 4 hrs. Within 3 days Application Method - Brush/Roller/Airless spray One-year in original unopened containers. Do not expose to direct sunlight. Packaging Supplied in 20 Ltr. packs. Special packs may be available on request. Performance Data CHEMICAL RESISTANCE : Unaffected by total immersion in At 27°C u p to 2000 hrs for IPA/ Jet Fuel/ ATF Ammonia soln. 25 % Hydrochloric Acid up to 20% Sulphuric Acid up to 30% Sodium Hydroxide all concentration Results : Does not show any blistering, wrinkling & lift of paint film . Tests Standards Results Impact resistance As per ASTM D 2794 - 93 No failure (3.464 lb load dropped at height 100 inch ) Scratch hardness ( at 1.5 kg load ) IS : 101 - 1988 (Pt.5/sec.2) No such scratch as to show bare metal Humidity Resistance As per BS 3900 part F2 No failure 3000 hrs. Salt fog resistance ASTM B117 No failure 2000 hrs. Resistance to distt. water IS : 101 (Part 7 ) No failure 500 hrs Note: Tests have been conducted on two coats. About the Company Legal Status of Firm: Limited Company Number of Employees: 51 To 100 People Annual Turnover: 25 - 100 Cr company-description: Clean Coats is an ISO 9001:2015, ISO 14001:2015 certified organization manufacturing and exporting a range of Epoxy Floorings, Anti Corrosion Coatings, PU Coatings & Construction Chemicals. Our product conforms to the eco-friendly LEED Green Building Norm.Clean Coats has been awarded CRISIL-Rating of SE-1A indicating Highest Performance Capability. This is the topmost rating given in the SME segment.Our products are eco friendly with minimal VOC (volatile organic compounds) that adhere to the LEED and Indian Green Building Council (IGBC) IEQ Credit 4.2.