Silicon Based Heat Resistant Coating Paint

A Two pack Silicon based heat resistant coating for application up to 600 degree CRECOMMENDED USE On Chimneys, Boilers and places which are regularly heated and temperature remains high. SURFACE PREPARATION Remove grease, oil and other contaminants preferably using degreasing solvent. Thoroughly dust down all surfaces. HEALTH & SAFETY All work involving the application and use of this product should be performed in compliance with all relevant National Health, Safety & Environmental standards and regulations. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. If you do not fully understand these warnings and instructions or if you cannot strictly comply with them, do not use this product. Proper ventilation and protective measures must be provided during applying and drying to keep solvent vapor concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Actual safety measures are dependent on application methods and work environment. This is a solvent based primer and care should be taken to avoid inhalation of spray mist or vapor as well as contact between the wet paint and exposed skin or eyes. APPLICATION METHOD 1. Stir the Base part thoroughly. Mix the base and Paste as per our recommended ratio of 4 : 1 by volume. Stir & mix thoroughly to attain homogeneity2. Add thinner into the mix, if required, depending on application method, and stir thoroughly for few minute. 3. Good ventilation is usually required in confined areas to ensure correct drying. Application: By Brush/By Air Spray/By Airless Spray For Brush application, a maximum of 5% thinner, if required, is to be added. Use: Quality brushes for paint application. For Air spray application: 10-15% For Airless spray application: Max 5% Nozzle Orifice: 1 .2 -1 .4 mm for air spray and Nozzle Orifice: 0.28 mm for airless spray. Nozzle Pressure: 40-70 p.s.i for air spray and Nozzle Pressure: 1400-1800 psi for airless spray. About the Company Legal Status of Firm: Proprietorship Number of Employees: 51 To 100 People Annual Turnover: 40 L - 1.5 Cr company-description: Established in year 2006, "Rudra Enterprise" is anufacturer Fire Protective Coatings, Industriyal paint & Coating etc. We direct all our activities to cater the expectations of customers by providing them with excellent quality products as per their gratification. Moreover, we follow moral business policies and crystal pure transparency in all our transactions to keep healthy relations with the customers. For our accomplishment story, we are grateful to our Mr. Bhagirath Sinh Chauhan, whose continual backing and direction have been useful to us for attaining exponential development in the current market.