BR-EM SH 20V(Silicone Fluid emulsion release agent) The BR-EM SH 20V emulsion contains 20% dimethyl polysiloxane and a non-fugitive1, largely non- ionicemulsifier. Rubber releasing agent that is effective and extensively used. It has been specially formulated for use as polish ingredients. This emulsion is used to provide good gloss and minimum smear in car polish formulation. Compared to traditional dimethyl polysiloxane emulsions, BR-EM SH 20V has the following advantages: Shines brilliantly on natural rubber and EVA sheets. For rubber, this is an excellent mould release agent. On the mould, it does not leave a tarry, carbonaceous residue. Both in its original form and when diluted, it has high emulsion stability. Temperatures as high as 50 degrees Celsius and as low as 0 degrees Celsius are both stable General CharacteristicsPhysical Appearance : White Solid Content : 25±2Active : 20Consistency : ViscousType of Emulsifier : Non- Fugitive, essentially non-ionicThese figures are only meant to be used as a guide and should not be used to generate specifications.Application:Rubber surface shininga) Rubber Slipper2:BR-EM SH 20V shines the rubber strip and the inside surface of the slipper beautifully. It may be applied to the rubber surface by simply brushing it on. When BR-EM SH 20V is mixed 1:1 with water,the best results are produced.b) Bicycle Tyre:BR-EM SH 20V gives bicycle tyres a brilliant sheen. It is used in a 1:1 ratio with water in this recipe.Working as a Release Agenta) Slipper Sheet: Sheets are usually 6mm to 12mm thick and 36"x 36" in size. BR-EM SH 20V provides good sheet release from the mould. A fresh coating on the mould surface is requiredevery time for optimal release. Spraying at a 1:5 ratio with water can be used to apply the coating.b) Micro Cellular Sheet: This sheet is necessary for the slippers' lower section. Sheets are 1mm to 8mm thick and 36" x 36" or 30" x 30" in size. BR-EM SH 20V is employed as a mould release agent in this case. The application process is similar to that of the Slipper sheet.Sheet of Banwar:This sheet is required for the slipper's top section. Sheets are around 1mm to 8mm thick and have a 36" x 36" or 30" x 30" surface area. BR-EM SH 20V is employed as a mould release agent in this case. The application process is similar to that of the Slipper sheet.Bicycle paddle and brake shoe: BR-EM SH 20V is a mould release agent that may be used directlyor in a 1:1 water-to-silicone ratio.Tyres for bicycles:In the production of bicycle tyres, BR-EM SH 20V is an effective releasing agent. BR-EM SH 20V is mixed 1:1with water or used straight.EVA Sheet3:BR-EM SH 20V is utilised as a releasing agent in the production of EVA sheets. BR-EM SH 20V can be usedat a 1:5 ratio with water for efficient release.Storage stability:The BR-EM SH 20V must be used within one year after its manufacture date. Keep the original packetsunopened and at a temperature of 30˚C but not below 0˚C to keep all of the qualities.After you've opened the packages, use the products.Packing size:BR-EM SH 20V is available in 50 kg Blue brand Packing. About the Company GST Registration Date: 2017 Legal Status of Firm: "},{"DATA":"Hitesh Garg / Vivek Gupta","TITLE":""},{"DATA":"Rs. 100 - 500 Crore","TITLE":"Annual Turnover"},{"DATA":"","TITLE":"GST Partner Name"},{"DATA":"2017","TITLE":"GST Registration Year"},{"DATA":"Partnership","TITLE":"GST Legal Status of Firm"},{"DATA":"Manufacturer","TITLE":"GST Nature of Business"},{"DATA":"100 - 500 Cr","TITLE":"GST Annual Turnover"},{"DATA":"Factory / Manufacturing,Retail Business,Input Service Distributor (ISD),Office / Sale Office,Wholesale Business,Recipient of Goods or Services,Warehouse / Depot,Import","TITLE":"GST Additional NOB"}],"CAT_ID":"202","CITY":"Sonipat","CITY_ID":"73838","COMPANYNAME":"B R Specialities LLP","COMPANY_VIDEO_LINK":"","CTA_DOC_PATH":"","DELIVERY_TIME":"7 to 14 days","DISCLAIMER_KEY":0,"DISCLAIMER_TEXT":[],"DISTRICT_ID":"64466","DOC_PATH":"http://5.imimg.com/data5/SELLER/Doc/2024/10/458518484/RV/ZN/ES/117609385/rubber-mold-release-agent.pdf","EMAIL_VERIFIED":1,"ETO_OFR_COMPANY_TSCODE":"br-specialities-sonipat","ETO_OFR_PAY_TERM":"","FK_GL_COUNTRY_ISO":"IN","FOB_PRICE":"140","FOB_PRICE_CURRENCY":"INR","GLCAT_MCAT_COMPANY_DISPLAY_FLAG":2,"GLCAT_MCAT_IMAGE_DISPLAY":2,"GLCAT_MCAT_NO_PRICE":2,"GLCAT_MCAT_NO_UNIT":0,"GLCAT_MCAT_SOLD_FLAG":2,"GLCAT_MCAT_TEMPLATE_ID":84,"GLUSR_CUST_NAME":"LEADER","GLUSR_NOOF_EMP_VAL":"101 to 500 People","GLUSR_PROFILE_MEDIA_URL":"","GLUSR_USR_ADULT_FLAG":0,"GLUSR_USR_BIZ_TYPE":"Manufacturer","GLUSR_USR_COUNTRYNAME":"India","GLUSR_USR_CUSTTYPE_WEIGHT":"199","GLUSR_USR_DESC":"","GLUSR_USR_DISTRICT":"","GLUSR_USR_FIRSTNAME":"Hitesh","GLUSR_USR_ID":"117609385","GLUSR_USR_LATITUDE":"","GLUSR_USR_LISTING_STATUS":"LST","GLUSR_USR_LOC_PREF":"LOCAL","GLUSR_USR_LOGO_IMG":"https://5.imimg.com/data5/SELLER/Logo/2025/3/498466465/NF/LK/QC/117609385/brs-90x90.png","GLUSR_USR_LONGITUDE":"","GLUSR_USR_MEMBERSINCE":"2020-11-09 17:56:03","GLUSR_USR_MEMBERSINCE_NEW":"5 yrs","GLUSR_USR_STATE":"","GLUSR_USR_TRADEMEMBERSHIP":"","GLUSR_USR_YEAR_OF_ESTB":"2011","GLUSR_USR_ZIP":"","GL_LEGAL_STATUS_VAL":"Partnership Firm","GL_TURNOVER_VAL":"Rs. 100 - 500 Crore","GST_VERIFIED":1,"GST_VERIFIED_FLAG":1,"IIL_DISPLAY_FLAG":1,"INDIC_HINDI_NAME":"","INDIC_HINDI_URL":"","ISQ":[{"FK_IM_SPEC_MASTER_DESC":"Packaging Size","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"50L"},{"FK_IM_SPEC_MASTER_DESC":"Usage/Application","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"Industrial"},{"FK_IM_SPEC_MASTER_DESC":"Type","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"Rubber Mold Release Agent"},{"FK_IM_SPEC_MASTER_DESC":"Color","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"White"},{"FK_IM_SPEC_MASTER_DESC":"Model Name/Number","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"EMSH-20"},{"FK_IM_SPEC_MASTER_DESC":"Package Type","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"Plastic Carboy"},{"FK_IM_SPEC_MASTER_DESC":"Country of Origin","IM_SPEC_OPTIONS_DESC":"","SUPPLIER_RESPONSE_DETAIL":"Made in India"}],"IS_PROD_SERV":"P","ITEM_DOCS":[],"ITEM_IMG":[{"IMAGE_1000x1000":"https://5.imimg.com/data5/SELLER/Default/2025/7/531750879/MT/AE/VD/117609385/rubber-mold-release-agent-1000x1000.png","IMAGE_125x125":"https://5.imimg.com/data5/SELLER/Default/2025/7/531750879/MT/AE/VD/117609385/rubber-mold-release-agent-125x125.png","IMAGE_250x250":"https://5.imimg.com/data5/SELLER/Default/2025/7/531750879/MT/AE/VD/117609385/rubber-mold-release-agent-250x250.png","IMAGE_500X500":"https://5.imimg.com/data5/SELLER/Default/2025/7/531750879/MT/AE/VD/117609385/rubber-mold-release-agent-500x500.png","IMAGE_ORIGINAL":"https://5.imimg.com/data5/SELLER/Default/2025/7/531750879/MT/AE/VD/117609385/rubber-mold-release-agent.png"},{"IMAGE_1000x1000":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751044/CN/JP/BT/117609385/rubber-mold-release-agent-1000x1000.png","IMAGE_125x125":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751044/CN/JP/BT/117609385/rubber-mold-release-agent-125x125.png","IMAGE_250x250":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751044/CN/JP/BT/117609385/rubber-mold-release-agent-250x250.png","IMAGE_500X500":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751044/CN/JP/BT/117609385/rubber-mold-release-agent-500x500.png","IMAGE_ORIGINAL":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751044/CN/JP/BT/117609385/rubber-mold-release-agent.png"},{"IMAGE_1000x1000":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751154/IJ/ZU/HK/117609385/rubber-mold-release-agent-1000x1000.jpg","IMAGE_125x125":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751154/IJ/ZU/HK/117609385/rubber-mold-release-agent-125x125.jpg","IMAGE_250x250":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751154/IJ/ZU/HK/117609385/rubber-mold-release-agent-250x250.jpg","IMAGE_500X500":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751154/IJ/ZU/HK/117609385/rubber-mold-release-agent-500x500.jpg","IMAGE_ORIGINAL":"https://5.imimg.com/data5/SELLER/Default/2025/7/531751154/IJ/ZU/HK/117609385/rubber-mold-release-agent.jpg"},{"IMAGE_1000x1000":"https://5.imimg.com/data5/SELLER/Default/2025/10/550483609/XG/VD/MQ/117609385/rubber-mold-release-agent-1000x1000.png","IMAGE_125x125":"https://5.imimg.com/data5/SELLER/Default/2025/10/550483609/XG/VD/MQ/117609385/rubber-mold-release-agent-125x125.png","IMAGE_250x250":"https://5.imimg.com/data5/SELLER/Default/2025/10/550483609/XG/VD/MQ/117609385/rubber-mold-release-agent-250x250.png","IMAGE_500X500":"https://5.imimg.com/data5/SELLER/Default/2025/10/550483609/XG/VD/MQ/117609385/rubber-mold-release-agent-500x500.png","IMAGE_ORIGINAL":"https://5.imimg.com/data5/SELLER/Default/2025/10/550483609/XG/VD/MQ/117609385/rubber-mold-release-agent.png"}],"IVE_FLAG":1,"Infrastructure":[],"LOCALITY":"","LONG_ADDRESS":"Sonipat, Haryana","MCAT_RANK":"","META":[],"METADESC":"B R Specialities LLP - Offering Rubber Mold Release Agent, Packaging Size: 50L at Rs. 140/kg in Sonipat, Haryana. Get Silicone Emulsion at lowest price | ID: 2855023989073","METAKEYWORD":"Rubber Mold Release Agent manufacturer \u0026 oem manufacturer, silicone emulsion, silicone emulsion, paints, wall putty \u0026 varnishes, B R Specialities LLP, Sonipat, Haryana, B R Specialities LLP map \u0026 directions","METATITLE":"Rubber Mold Release Agent, Packaging Size: 50L at Rs. 140/kg in Sonipat | ID: 2855023989073","MOBILE_PNS":"+91-7942667239","MOBILE_VERIFIED":1,"PACKAGING_DETAILS":"50 Kg (Carboy)","PARENT_MCAT":{"GLCAT_MCAT_FLNAME":"industrial-paints","GLCAT_MCAT_ID":30698,"GLCAT_MCAT_NAME":"Industrial Paints and Coatings"},"PC_IMG_SMALL_100X100":"https://5.imimg.com/data5/SELLER/Default/2024/10/461311213/MR/PB/IA/117609385/rubber-mold-release-agent-125x125.jpg","PC_IMG_SMALL_600X600":"https://5.imimg.com/data5/SELLER/Default/2024/10/461311213/MR/PB/IA/117609385/rubber-mold-release-agent-500x500.jpg","PC_ITEM_CODE":"284838888","PC_ITEM_DESC_SMALL":"\u003cp\u003e\u003cb\u003eBR-EM SH 20V\u003cbr /\u003e(Silicone Fluid emulsion release agent)\u003c/b\u003e\u003c/p\u003e\n\u003cp\u003eThe \u003cb\u003eBR-EM SH 20V\u003c/b\u003e emulsion contains 20% dimethyl polysiloxane and a non-fugitive1, largely non- ionicemulsifier. Rubber releasing agent that is effective and extensively used. It has been specially formulated for use as polish ingredients. This emulsion is used to provide good gloss and minimum smear in car polish formulation.\u003cbr /\u003e\u003cbr /\u003e\u003c/p\u003e\n\u003cp\u003e\u003cb\u003eCompared to traditional dimethyl polysiloxane emulsions, BR-EM SH 20V has the following advantages:\u003c/b\u003e\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eShines brilliantly on natural rubber and EVA sheets. For rubber, this is an excellent mould release agent.\u003c/li\u003e\n\u003cli\u003eOn the mould, it does not leave a tarry, carbonaceous residue.\u003c/li\u003e\n\u003cli\u003eBoth in its original form and when diluted, it has high emulsion stability.\u003c/li\u003e\n\u003cli\u003eTemperatures as high as 50 degrees Celsius and as low as 0 degrees Celsius are both stable\u003c/li\u003e\n\u003c/ul\u003e\n\u003cbr /\u003e\u003cb\u003eGeneral Characteristics\u003cbr /\u003e\u003c/b\u003ePhysical Appearance : White Solid Content : 25\u0026plusmn;2\u003cbr /\u003eActive : 20\u003cbr /\u003eConsistency : Viscous\u003cbr /\u003eType of Emulsifier : Non- Fugitive, essentially non-ionic\u003cbr /\u003eThese figures are only meant to be used as a guide and should not be used to generate specifications.\u003cbr /\u003e\u003cbr /\u003e\u003cb\u003eApplication:\u003cbr /\u003e\u003c/b\u003e\u003cb\u003eRubber surface shining\u003cbr /\u003e\u003c/b\u003e\u003cb\u003ea) Rubber Slipper\u003csup\u003e2\u003c/sup\u003e:\u003cbr /\u003e\u003c/b\u003eBR-EM SH 20V shines the rubber strip and the inside surface of the slipper beautifully. It may be applied to the rubber surface by simply brushing it on. When BR-EM SH 20...
