3-part, silica-based composite coating designed to protect industrial processing equipment against harsh temperature and abrasion.LOCTITE® PC 7000 is a unique 3-part, rapid-setting, silica-based composite coating system. It is designed to protect industrial processing equipment, such as coal tip burners in boilers and furnaces, against harsh temperature and abrasion. It is an environmentally friendly, water-based system containing a resin and abrasion resistant filler mixture. Superior abrasion resistance at high temperatures up to +1,200 °C Designed to protect industrial processing equipment against harsh temperature and abrasion Acts as a protective barrier - sustaining boiler efficiency and prolonging equipment life Bonds well to inorganic substrates such as concrete and refractory bricks with minimal surface preparation Typical applications may include baffle plates of coal tip burners, aluminium and steel smelter furnace repairs and coating of refractory brick structures of chimneys. Directions for use: Surface Preparation Proper surface preparation is critical to the long-term performance of this product. The exact requirements vary with the severity of the application, expected service life, and initial substrate conditions. 1. Clean, dry and abrade application surface with suitable hand tools. 2. Solvent cleaning with a residue-free solvent is recommended to improve adhesion. 3. Stainless steel metallic mesh of 1.8 mm wire diameter and diamond shaped openings as reinforcement is required and should be spot welded. 4. Solvent cleaning with a residue-free solvent is recommended as the final step to remove contaminants introduced during welding. Mixing: 1. It is strongly recommended to mix the complete kit at once. The overall mixing ratio is 1:3:17, which is assured by using the complete kit . 2. Add Part A to Part B and mix vigorously for 1 to 2 minutes. 3. Premix part C and then add incrementally to the liquid mixture. Stir the mixture with a heavy duty mixing blade until a homogenous appearance is achieved. 4. All components should be mixed uniformly before application. Application Method: 1. Apply fully mixed material within the 20 to 30 minute pot life to the prepared surface . 2. Use a plastic trowel to spread the product across the entire area evenly. 3. Apply a layer of approximately 5 mm on expanded metal. If required, more layers can be applied after 2 to 4 hours depending on temperature. Additional layers, or, in the case of no expanded metal, a maximum thickness of 3 to 4 mm should be applied. 4. Immediately clean any contaminated skin or clothing with soap and water. 5. Allow LOCTITE® PC 7000™ to cure for 24 hours at room temperature before post curing at elevated temperatures. Not for product specifications The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product. Storage Store product in the unopened contain About the Company GST Registration Date: 2017 Legal Status of Firm: "},{"DATA":"","TITLE":""},{"DATA":"Rs. 1 - 2 Crore","TITLE":"Annual Turnover"},{"DATA":"","TITLE":"GST Partner Name"},{"DATA":"2017","TITLE":"GST Registration Year"},{"DATA":"Proprietorship","TITLE":"GST Legal Status of Firm"},{"DATA":"Trader - Wholesaler/Distributor","TITLE":"GST Nature of Business"},{"DATA":"1.5 - 5 Cr","TITLE":"GST Annual Turnover"},{"DATA":"Others","TITLE":"GST Additional NOB"}],"CAT_ID":"642","CITY":"Bareilly","CITY_ID":"70735","COMPANYNAME":"New Tech Engineers","COMPANY_VIDEO_LINK":"","CTA_DOC_PATH":"","DELIVERY_TIME":"","DISCLAIMER_KEY":0,"DISCLAIMER_TEXT":[],"DISTRICT_ID":"64863","DOC_PATH":"http://5.imimg.com/data5/SELLER/Doc/2021/12/IB/RP/GS/118231668/pc-7000-abrasion-resistance-coating.pdf","EMAIL_VERIFIED":1,"ETO_OFR_COMPANY_TSCODE":"","ETO_OFR_PAY_TERM":"","FK_GL_COUNTRY_ISO":"IN","FOB_PRICE":"3600","FOB_PRICE_CURRENCY":"INR","FREE_SUPPLIER_VERIFIED_FLAG":1,"GLCAT_MCAT_COMPANY_DISPLAY_FLAG":2,"GLCAT_MCAT_IMAGE_DISPLAY":3,"GLCAT_MCAT_NO_PRICE":0,"GLCAT_MCAT_NO_UNIT":0,"GLCAT_MCAT_SOLD_FLAG":null,"GLCAT_MCAT_TEMPLATE_ID":84,"GLUSR_CUST_NAME":"vgFCPplus with PNS(R)","GLUSR_NOOF_EMP_VAL":"Upto 10 People","GLUSR_PROFILE_MEDIA_URL":"","GLUSR_USR_ADULT_FLAG":0,"GLUSR_USR_BIZ_TYPE":"Retailer","GLUSR_USR_COUNTRYNAME":"India","GLUSR_USR_CUSTTYPE_WEIGHT":"1249","GLUSR_USR_DESC":"\u003cb\u003eEstablished\u003c/b\u003e in the Year 2009 at ,(Utter Pardesh,India), we \u0026ldquo;M/S New Tech Engineers\u0026rdquo;Engaged as Retailer and Trader and Supplier of Loctite 200 High Performance Spray, Flange Sealant more.","GLUSR_USR_DISTRICT":"","GLUSR_USR_FIRSTNAME":"Amit","GLUSR_USR_ID":"118231668","GLUSR_USR_LATITUDE":"","GLUSR_USR_LISTING_STATUS":"LST","GLUSR_USR_LOC_PREF":"LOCAL","GLUSR_USR_LOGO_IMG":"https://5.imimg.com/data5/SELLER/Logo/2021/12/OB/WL/ME/118231668/new-tech-engineers-logo-90x90.jpg","GLUSR_USR_LONGITUDE":"","GLUSR_USR_MEMBERSINCE":"2020-11-20 05:37:37","GLUSR_USR_MEMBERSINCE_NEW":"5 yrs","GLUSR_USR_STATE":"","GLUSR_USR_TRADEMEMBERSHIP":"","GLUSR_USR_YEAR_OF_ESTB":"2009","GLUSR_USR_ZIP":"","GL_LEGAL_STATUS_VAL":"Individual - Proprietor","GL_TURNOVER_VAL":"Rs. 1 - 2 Crore","GST_VERIFIED":1,"GST_VERIFIED_FLAG":1,"IIL_DISPLAY_FLAG":1,"INDIC_HINDI_NAME":"","INDIC_HINDI_URL":"","ISQ":[{"FK_IM_SPEC_MASTER_DESC":"Brand","IM_SPEC_OPTIONS_DESC":"PPG Asian Paints, Dr. Fixit, Nerolac, Other","SUPPLIER_RESPONSE_DETAIL":"Loctity"},{"FK_IM_SPEC_MASTER_DESC":"Usage/Application","IM_SPEC_OPTIONS_DESC":"Domestic Use, Industrial Use, Other","SUPPLIER_RESPONSE_DETAIL":"Industrial Use"},{"FK_IM_SPEC_MASTER_DESC":"Packaging Size","IM_SPEC_OPTIONS_DESC":"1 L, 20 L, 40 L, Other","SUPPLIER_RESPONSE_DETAIL":"10L"},{"FK_IM_SPEC_MASTER_DESC":"Area Of Application","IM_SPEC_OPTIONS_DESC":"Metal, Plastic, Glass, Other","SUPPLIER_RESPONSE_DETAIL":"Plastic"},{"FK_IM_SPEC_MASTER_DESC":"Packaging Type","IM_SPEC_OPTIONS_DESC":"Can, Bucket, Tin, Other","SUPPLIER_RESPONSE_DETAIL":"Bucket"},{"FK_IM_SPEC_MASTER_DESC":"Color","IM_SPEC_OPTIONS_DESC":"Yellow, Red, White, Other","SUPPLIER_RESPONSE_DETAIL":"White"},{"FK_IM_SPEC_MASTER_DESC":"Paint Form","IM_SPEC_OPTIONS_DESC":"Liquid, Powder, Paste, Other","SUPPLIER_RESPONSE_DETAIL":"Liquid"},{"FK_IM_SPEC_MASTER_DESC":"Frequency","IM_SPEC_OPTIONS_DESC":"Monthly, Yearly, One Time, Other","SUPPLIER_RESPONSE_DETAIL":"Yearly"},{"FK_IM_SPEC_MASTER_DESC":"Model Name/Number","IM_SPEC_OPTIONS_DESC":"None","SUPPLIER_RESPONSE_DETAIL":"PC 7000"}],"IS_PROD_SERV":"P","ITEM_DOCS":[],"ITEM_IMG":[],"IVE_FLAG":0,"Infrastructure":[],"LOCALITY":"","LONG_ADDRESS":"Bareilly, Uttar Pradesh","MCAT_RANK":"","META":[],"METADESC":"New Tech Engineers - Offering Yearly PC 7000 Abrasion Resistance Coating, For Industrial Use, 10L at Rs. 3600/litre in Bareilly, Uttar Pradesh. Also find Abrasion Resistant Coatings price list | ID: 24318788797","METAKEYWORD":"PC 7000 Abrasion Resistance Coating retailer, abrasion resistant coatings, resistant coatings, paints, wall putty \u0026 varnishes, New Tech Engineers, Bareilly, Uttar Pradesh, New Tech Engineers map \u0026 directions","METATITLE":"Yearly PC 7000 Abrasion Resistance Coating, For Industrial Use, 10L at Rs. 3600/litre in Bareilly","MOBILE_PNS":"+91-8047516602,2124","MOBILE_VERIFIED":1,"PACKAGING_DETAILS":"","PARENT_MCAT":{"GLCAT_MCAT_FLNAME":"industrial-paints","GLCAT_MCAT_ID":30698,"GLCAT_MCAT_NAME":"Industrial Paints and Coatings"},"PC_IMG_SMALL_100X100":"https://5.imimg.com/data5/SELLER/Default/2021/12/JK/UZ/BG/118231668/pc-7000-high-temperature-abrasion-resistance-coating-125x125.jpg","PC_IMG_SMALL_600X600":"https://5.imimg.com/data5/SELLER/Default/2021/12/JK/UZ/BG/118231668/pc-7000-high-temperature-abrasion-resistance-coating-500x500.jpg","PC_ITEM_CODE":"172296368","PC_ITEM_DESC_SMALL":"3-part, silica-based composite coating designed to protect industrial processing equipment against harsh temperature and abrasion.LOCTITE\u0026reg; PC 7000 is a unique 3-part, rapid-setting, silica-based composite coating system. It is designed to protect industrial processing equipment, such as coal tip burners in boilers and furnaces, against harsh temperature and abrasion. It is an environmentally friendly, water-based system containing a resin and abrasion resistant filler mixture. \n\u003cul\u003e\n\u003cli\u003eSuperior abrasion resistance at high temperatures up to +1,200 \u0026deg;C\u003c/li\u003e\n\u003cli\u003eDesigned to protect industrial processing equipment against harsh temperature and abrasion\u003c/li\u003e\n\u003cli\u003eActs as a protective barrier - sustaining boiler efficiency and prolonging equipment life\u003c/li\u003e\n\u003cli\u003eBonds well to inorganic substrates such as concrete and refractory bricks with minimal surface preparation\u003c/li\u003e\n\u003cli\u003eTypical applications may include baffle plates of coal tip burners, aluminium and steel smelter furnace repairs and coating of refractory brick structures of chimneys.\u003c/li\u003e\n\u003c/ul\u003e\n\u003cb\u003eDirections for use:\u003c/b\u003e Surface Preparation Proper surface preparation is critical to the long-term performance of this product. The exact requirements vary with the severity of the application, expected service life, and initial substrate conditions. 1. Clean, dry and abrade application surface with suitable hand tools. 2. Solvent cleaning with a residue-free solvent is recommended to improve adhesion. 3. Stainless steel metallic mesh of 1.8 mm wire diameter and diamond shaped openings as reinforcement is required and should be spot welded. 4. Solvent cleaning with a residue-free solvent is recommended as the final step to remove contaminants introduced during welding. Mixing: 1. It is strongly recommended to mix the complete kit at once. The overall mixing ratio is 1:3:17, which is assured by using the complete kit . 2. Add Part A to Part B and mix vigorously for 1 to 2 minutes. 3. Premix part C and then add incrementally to the liquid mixture. Stir the mixture with a heavy duty mixing blade until a homogenous appearance is achieved. 4. All components should be mixed uniformly before application. Application Method: 1. Apply fully mixed material within the 20 to 30 minute pot life to the prepared surface . 2. Use a plastic trowel to spread the product across the entire area evenly. 3. Apply a layer of approximately 5 mm on expanded metal. If required, more layers can be applied after 2 to 4 hours depending on temperature. Additional layers, or, in the case of no expanded metal, a maximum thickness of 3 to 4 mm should be applied. 4. Immediately clean any contaminated skin or clothing with soap and water. 5. Allow LOCTITE\u0026reg; PC 7000\u0026trade; to cure for 24 hours at room temperature before post curing at elevated temperatures. Not for product specifications The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product. Storage Store product in the unopened contain","PC_ITEM_DISPLAY_ID":"24318788797","PC_ITEM_DISPLAY_NAME":"Yearly PC 7000 Abrasion Resistance Coating, For Industrial Use, 10L","PC_ITEM_HINDI_NAME":"","PC_ITEM_ID":"172296368","PC_ITEM_IMG_1000x1000":"https://5.imimg.com/data5/SELLER/Default/2021/12/JK/UZ/BG/118231668/pc-7000-high-temperature-abrasion-resistance-coating-1000x1000.jpg","PC_ITEM_IMG_ORIGINAL":"https://5.imimg.com/data5/SELLER/Default/2021/12/JK/UZ/BG/118231668/pc-7000-high-temperature-abrasion-resistance-coating.jpg","PC_ITEM_IMG_ORIGINAL_WH":"1000,804","PC_ITEM_IMG_SMALL":"https://5.imimg.com/data5/SELLER/Default/2021/12/JK/UZ/BG/118231668/pc-7000-high-temperature-abrasion-resistance-coating-250x250.jpg","PC_ITEM_IS_ECOM":0,"PC_ITEM_MIN_ORDER_QUANTITY":"","PC_ITEM_MOQ_UNIT_TYPE":"Litre","PC_ITEM_NAME":"PC 7000 Abrasion Resistance Coating","PC_ITEM_SELLER_ADS_FLAG":"","PC_ITEM_STATUS_APPROVAL":"40","PDP_ALTERNATE_APP_URL":"android-app://c...
